Motorbikes Design

Tuesday, June 29, 2010

Aprilia Pegaso 650 Picture Design and Specification

aprilia pegaso 650 picture design and specification

Monday, June 28, 2010

Ducati Desmosedici GP9 Picture Design and Specification

ducati desmosedici gp9 picture design and specification

Letztes Jahr begann die Saison für Nicky Hayden mehr oder minder in Assen, denn ab dem Rennen in den Niederlanden sprach der US-Amerikaner damals davon, dass er die Ducati Desmosedici GP9 langsam verstehen lerne und in den Griff bekomme. Nun, ein Jahr später, kämpft er wieder an vorderster Front der MotoGP-Weltmeisterschaft. Ins Dutch TT-Wochenende startete der Weltmeister von 2006 mit Rang drei hinter seinem Teamkollegen Stoner.

"Das Motorrad fühlte sich heute aus der Box heraus gut an und wir konnten ein paar Änderungen finden, die es noch besser machten. Aber die Lücke zur Spitze ist noch ziemlich groß und darum haben wir noch Arbeit vor uns", kommentiere das Kentucky-Kid die 0,517 Sekunden, die er auf Jorge Lorenzo auf eins verlor.

"Wir probieren immer neues Zeug aus und das war heute nicht anders. Und das was wir ausprobiert haben schien zu funktionieren und darum bin ich Ducati sehr dankbar. Hoffentlich können wir morgen darauf aufbauen und versuchen, eine ähnliche Position im Qualifying - dann mit einer kleineren Lücke zur Spitze - herauszufahren."

Dani Pedrosa Photo Gallery

dani pedrosa photo gallery

DANI PEDROSA – 3rd – 2m 03.586s +0.278s
"Today we were quite fast in both sessions and we have a good machine setting, so I think we have the potential for a strong race. We still need to decide which of the Bridgestone tyre options we’ll use because tomorrow it looks like it may be warmer than today. I crashed when I was on my last qualifying lap as I braked going into a left hander. I hit some bumps and then the front started to move a lot and then had a little slide. Maybe the bike went over me and at that moment it hurt, but afterwards the pain went away so I’m ok for tomorrow. The lap times were getting faster in each session and I think I’m still learning the track - every time you go out you learn more about the line, the braking points and the corners where the bumps are - and that’s normal on a new track. We’re on the front row which is always important for a good getaway, so tomorrow I hope we can have another good performance.”

ANDREA DOVIZIOSO – 4th – 2m 03.995s +0.687s
“I’m happy with qualifying in fourth place and starting from the front of the second row. I wanted to be a little bit closer in terms of lap times and we still need to improve the pace for tomorrow so that we can fight for first place, but I’m satisfied with the result today. This morning I crashed, fortunately without hurting myself, and I was able to get straight back on my second bike and be back on the pace immediately. Because of this crash we couldn’t do so much comparison work between the two chassis we had available, and so during qualifying I only used the new one, which seems to work well. The track layout is really fascinating - I like it a lot - but the main issue remains the bumps. We’re quietly confident for tomorrow and I’m definitely looking for another podium finish - at least.”

TOSHIYUKI YAMAJI - REPSOL HONDA TEAM MANAGER
"We are actually looking in good shape for the race here at Silverstone tomorrow and I think Dani and Andrea have a chance to fight for the win tomorrow. Considering that both riders fell at quite high speed today, this is fortunate for us and I’m happy that neither rider was hurt badly. The conditions today were cold and this, combined with the bumpy surface, means that finding the optimum machine set-up is a challenge, and we still have some areas to work on this evening. But I think we can use the warm-up to good effect and the Repsol Honda Team is determined to get a result to match the last race in Italy.”

2009 Norton NRV588 Picture Design and Specification

2009 norton nrv588 picture design and specification

Triumph Daytona 675 SE Limited Edition Picture Design and Review

triumph daytona 675 se limited edition picture design and review

In an unorthodox chain of events, Triumph invited a select few publications from around the world to sample the World Supersport-spec Daytona 675's shortly after the first round of the series at Phillip Island in Australia. Things like this early-season test at the Valencia circuit in southern Spain are usually saved until season's end to minimize collateral damage in case an overenthusiastic journalist runs out of talent. Apparently nobody got the memo. At any rate, this test would allow us to sample the exact same bike DiSalvo rode just as it came off the track in Phillip Island.

Loyal readers will remember the debacle we endured when we tried our hands at racing a 675 at the AMA level in 2008 ("Goldenrod", September '08). As far as we can tell, Giuliano Rovelli never read that story (and if he did, it didn't faze him) and we're all the better for it. A Triumph enthusiast in his own right, in 2007 he started the Triumph BE1 Racing team and contested the Italian Supersport championship with the Daytona 675, with much greater success than us. By the end of the season his team scored two podium finishes. It was also about this time that the 675 was allowed into World Supersport competition and Rovelli jumped at the chance to elevate his young team to the next level. They did well enough that in 2009 Triumph appointed them as its official factory entry. With veteran racer Garry McCoy at the controls, the team earned its best finish yet, with "Gaza" McCoy earning two podiums and finishing the year eighth in the point standings.

Spurred by that success, 2010 sees the team expand to a four rider lineup of David Salom, Matthew Legrive, and two AMA refugees-Chaz Davies and Jason DiSalvo-all vying for the championship. This success has also formed another collaboration between Rovelli and Triumph; the creation of the Triumph ParkinGO European Series, that'll contest seven European rounds alongside the World Superbike championship, with the riders all on equally prepared Triumph Street Triple R's (more on that in the accompanying sidebar).

2010 Buell 1125r Picture Design And Specification

2010 buell 1125r picture design and specification

Was sind überhaupt Buell-Motorräder? Vereinfacht gesagt: für die Straße zugelassene schnelle Motorräder von Harley Davidson. Aber eine Buell ist für die Fans noch viel mehr und mithin etwas Besonderes.

Die Buell Motorcycle Company war ein Motorradhersteller mit Firmensitz in East Troy, Wisconsin (USA). Am 15. Oktober 2009 gab der Eigentümer Harley-Davidson, für viele Motorradfans überraschend, die Einstellung der Motorradfertigung bekannt.

Buell (sprich: bjuell) ging 1993 unter der Beteiligung der Harley-Davidson Motor Company aus dem 1983 gegründeten Kleinstbetrieb von Erik Buell hervor, einem ehemaligen Rennfahrer, der bereits zuvor einige Zeit bei Harley-Davidson als Entwicklungsingenieur gearbeitet hatte.

Seit Februar 1998 hielt Harley-Davidson mit 98 Prozent die Mehrheit der Firmenanteile, bevor 2003 auch die bei Erik Buell verbliebenen zwei Prozent gekauft wurden. Erik Buell war bis zuletzt als Chairman Entwicklungschef zuständig für Konstruktion, Erprobung und Qualität. Am 15. Oktober 2009 gab Erik Buell das Ende der Serienproduktion von Motorrädern der Marke Buell bekannt. Die Produktion endete dann im Dezember vergangenen Jahres.

Erik Buell verließ daraufhin Harley-Davidson und gründete die Firma Erik Buell Racing. Diese produziert unter Lizenz von Harley-Davidson reine Rennmotorräder auf Basis der 1125R und vertreibt Rennsportzubehör.

Was macht nun Buell aus? Organisator Sigi Eickhorst: „Buell fahren ist eben anders.“

Motorbikes Design

Pages

Tuesday, June 29, 2010

Aprilia Pegaso 650 Picture Design and Specification

Monday, June 28, 2010

Ducati Desmosedici GP9 Picture Design and Specification

Dani Pedrosa Photo Gallery

2009 Norton NRV588 Picture Design and Specification

Triumph Daytona 675 SE Limited Edition Picture Design and Review

2010 Buell 1125r Picture Design And Specification

Blog Archive

Motorbikes Design

Links